欧美伦理电影在线免费观看,亚洲热av,三年片在线观看免费观看高清电影

主要崗位職責：
1. 負責所有壓縮機、汽輪機、鼓風機、膨脹機、泵、壓力容器、儲罐、溢流閥、交換器、管道、火炬檢測、生命保障系統、關鍵安全系統等機械系統的維修。
2. 支持檢查計劃，規范設計，法規遵從，質量控制標準，設備維修和服務適應性。
3. 在PSM和MIQA手冊的指導下，協助制定檢驗計劃和維修程序。
4. 將公司標準以及“公認和普遍接受的良好工程實踐”(如ASME和GB規范和API文檔)解釋到現場。
5. 執行設備設計、檢驗、服務適用性評估和機械完整性系統失效分析，制定和更新公司標準。
6. 實施和管理工程要求，以滿足設備選擇，維護和可靠性計劃。
7. 在工廠停機/正常運行期間檢查壓力系統(包括壓力容器，熱交換器，燃燒加熱器，轉化爐，儲罐，爐，管道)，并評估建議維修的結果，為開發和維護壓力系統標準，程序，***實踐，檢查合同和承包商服務提供意見。
8. 在故障排除和所有相關的維護工作或支持工作中提供實際的技術技能。
9. 執行預防性維護工作并支持MI工作的實施，如SAP PM01-03任務，故障排除，維修所有負責的設備。
10. 協調或協助監督承包商在工廠或車間的工作，以確保安全、質量和可靠性。
11. 通過改進工作流程和設備性能，不斷提高生產力和成本節約。啟動和實施CI(持續改進)節約項目。
12. 報告-每周錄入時間，準備書面或通過資源管理系統錄入的技術報告，以保持工廠文件的準確性，并為組織內其他人員有效履行職責提供信息。
13. 提供機械系統診斷服務，使用振動診斷工具和故障分析技術解決機械故障。這包括發布故障分析報告和提高可靠性的成本效益建議。
14. 制定機械設備大修作業包。
15. 啟動和實施可靠性和/或效率改進計劃和操作機械的***實踐，并專注于CONC。
16. 為大型機械提供安裝和調試支持，如壓縮機，膨脹機，渦輪機等。
17. 參與計劃和執行小停工和大停工。在停機期間提供技術支持和實際操作支持。
18. 備件庫存審查和備件采購技術支持，努力提高工廠的可靠性。
19. 及時了解和評估新的方法和工作實踐，以便在工廠內應用和使用。
20. 協助制定、實施和定期審查預防性/預測性維護計劃，以減少計劃外停機，提高工廠的整體生產能力。
21. 根據實際需要，可安排區域內出差。
工作要求：
1. 工作地點:江西九江
2. 學歷:機械或機械工程專業大專以上學歷。
3. 工作經驗:機械/機械工程師職位的最低要求是在壓縮機，汽輪機，鼓風機，膨脹機，壓力容器，儲罐，管道和焊接技術方面有5年以上的經驗。有大型機械檢修和管道應力分析經驗者優先。
4. 必須有實際工作經驗。
5. 具有重大停工支持，項目工作，工廠運營和維護工作經驗。
6. 熟悉供應商合同，熟悉區域內的店鋪支持。
7. 能夠獨立工作和團隊合作。
8. 對工作的態度和熱情。
PRINCIPAL ACCOUNTABILITIES
1. Responsible for the maintenance of all compressors, steam turbine, blower, expander, pump，pressure vessels, tanks, relief valves, exchangers, pipeline, flare detections, life support system, critical safety system and other mechanical system.
2. Support in inspection planning, code design, regulatory compliance, quality control standard, equipment repair, and fitness for service.
3. Support to develop Inspection Planning and Repair Procedure under the guidance from PSM and MIQA manuals.
4. Interpretation of corporate standards as well as “recognized and generally accepted good engineering practices” such as ASME and GB Codes and API Documents to sites.
5. Performing equipment design, inspection, fitness for service evaluations and failure analysis for mechanical integrity system Development and updating of corporate standards.
6. Implement and manage engineering requirements to satisfy equipments selection, maintenance and reliability initiatives.
7. Inspect Pressure Systems (including Pressure Vessels, Heat Exchangers, Fired Heaters, Reformers, Storage Tanks, furnace, Piping) during plant outages / normal operation and evaluate results for recommend repair, Input for development and maintenance of Pressure System standards, procedures, best practices, inspection contracts and contractor service.
8. Provide hand-on technical skills at the troubleshooting and all related maintenance work or supporting work responsible.
9. Perform preventive maintenance work and support to implement MI work, such as SAP PM01-03 tasks, troubleshooting, repair for all responsibly equipments.
10. Coordinate or assist of supervision the contractor’s work in the facility or shop to guarantee safety and quality and reliability.
11. Continually to drive productivity and cost savings and enhancement through improved work process and equipment performance. Initiate and Implement CI (continuous improvement) savings projects.
12. Reporting-Time entry weekly and prepare technical reports either written or through entries into the resource management system to maintain accurate documentations on the plants, and to provide information for others in the organization to carry out their responsibilities effectively.
13. Provide mechanical system diagnostics services in troubleshooting and resolving machinery issues using vibration diagnostics tools and failure analysis techniques. This includes issuing failure analysis reports and cost-effective recommendations for reliability improvements.
14. Develop mechanical equipment job-packs for major overhauls and repair.
15. Initiate and implement reliability and/or efficiency improvement initiatives and best practices on operating machinery and focus on CONC.
16. Provide installation and commission support for large machinery, e.g. compressors, expander, turbines, etc.
17. Participate in the planning and execution of minor and major shutdowns. Provide technical and hands on support as required during shutdowns.
18. Spare parts inventory review and parts purchasing support technically, effort in plant reliability improvement.
19. Keep abreast of and evaluate new methodologies, work practices, for application and use within the plant.
20. Assist in the development, implementation, and periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve overall plant on stream capability.
21. Business travel within region is required based on the actual need.
JOB REQUIREMENTS
1. Work location: Jiujiang, Jiangxi
2. Educational: College degree or above in Mechanical/Machinery Engineering.
3. Working Experience: The minimum requirements for the machinery/mechanical engineer’s position are 5+ years’ experience in compressor, steam turbine, blower, expander, pressure vessel,

九九热在线观看免费视频,97久久久久久久久久久久,久久一久久,久久免费一区,麻豆映画传媒在线观看,欧美黄色免费在线观看,中文字幕第一页久久

職位要求

職位描述

相似職位推薦